An exam is taken to complete a module. A module is a unit of study within a degree program that is defined in terms of subject matter, content, and duration, and in which the skills related to the respective qualification objective are specified and acquired. Each module generally consists of one or more courses or classes and usually concludes with an exam. There are also exceptions, such as modules that require more than one exam to complete, or those that are completed by fulfilling required attendance in a course associated with the module (in the case of required attendance, fulfilling the attendance requirement is legally equivalent to taking an exam).
As a rule, a module concludes with an exam. Notwithstanding this, individual modules may include multiple exams; these are often referred to as “partial exams.” This is the case in modules where it is required to complete multiple exams to determine whether the module’s competency objectives have been met.
If such partial exams are required, they must be explicitly regulated for the module in the examination regulations. If the module is not listed in the subject's own examination regulations—for example, because it is part of a separately published catalog of required electives—the regulations of that catalog apply.
Registration for the individual exams or partial exams in such a module is determined by their classification under the respective exam type (end-of-semester or in-semester).
If a registered module exam consists of several partial exams, students are entitled to take each of the partial exams during the same exam period, unless the respective examination regulations stipulate that passing one partial exam is a prerequisite for taking another partial exam within the module. However, if not all partial exams for a module can be completed during the semester, students must re-register for the entire module exam in the following semester when the module is offered again. Passed partial exams from the previous semester will be taken into account when grading the module.
In addition to registration via KU.Campus, registration with the examiners may be required if they have established and announced corresponding registration regulations (mandatory registration). If no further registration or withdrawal procedures are communicated, this is a non-mandatory, in-semester exam.
If the module consists of multiple partial exams that fall under both end-of-semester and in-semester exams (e.g., written examination and presentation), only the registration regulations for end-of-semester exams mentioned above apply.
Detailed explanations regarding registration can be found under the section “Module Exams at the KU”, which you can access via the “General Forms and Information” button (on the Examinations Office’s homepage).
Does a partial exam that was not completed count as a failed attempt?
Whether a partial exam that was not successfully completed counts as a failed attempt depends on whether registration for the exam is required. If the exam as a whole is classified as a registration-required exam (consisting of multiple partial exams, at least one of which is classified as an end-of-semester exam) and no valid withdrawal was declared for a partial exam that was not completed, the incomplete partial exam is considered a failed attempt. This failed attempt must be included in the overall grade calculation.
If the module exam as a whole is classified as a non-registration-required exam (all partial exams are conducted throughout the semester, and the examiners have not communicated any additional registration requirements), the partial exam that was not taken is not to be counted as a failed attempt. It is considered not to have been taken. No grade is assigned.
Does the KU have to offer the partial exam that was not attended again during the same exam period?
After non-attendance for a partial exam, the student is not entitled to have another partial exam made available to make up for the missed partial exam during the same exam period. This also applies in the event of a partial withdrawal for reasons beyond the student’s control.
If not all partial exams for a module can be completed during a single exam period, students must re-register or register for the entire module exam during the following exam period—or, if applicable, semester—in which the module is offered again. Passed partial exam results from the previous exam period or the preceding semester will be noted by the examiners and taken into account when grading the module.
How is the grade calculated when there are multiple graded partial exams, and what do I need to keep in mind regarding retaking a partial exam?
The Examination Regulations govern the examination procedures and therefore also specify, for modules with multiple partial exams, which partial exams are required and whether and how they are to be weighted. The module description cannot establish any provisions in this regard that deviate from the examination regulations.
If the examination regulations for the degree program do not contain any information on the calculation of the module’s overall grade, Section 20 of the General Examination Regulations applies to the grade calculation.
Examples of grade calculation for graded partial exams (Section 20(4) General Examination Regulations)
Example Module A:
Example Module B:
Example Module C:
How is the overall grade calculated if the module consists of graded and ungraded components?
Only the grade for the graded component is considered when calculating the module grade. However, the ungraded component must be completed. The overall grade is not recorded until the ungraded component has also been completed.
Does it matter for the grade calculation whether a component was graded 5.0 due to non-participation or an insufficient performance?
If a partial exam is graded 5.0, it is irrelevant for the grade calculation whether the grade was assigned due to a poor exam performance or non-attendance after mandatory registration.
How and when will I find out if I can or must retake a partial exam?
You have the right to be informed of your module grades in a timely manner before the start of the next registration period. This also applies to the grades for the respective partial exams. Your examiner will provide you with the partial exam grades upon request; the examiner will then calculate the overall grade and publish it in KU.Campus. The overall grade for the module determines whether you must retake the exam.
In order to decide whether to register for a retake exam, you must be able to determine in a timely manner whether you have already passed the module as a whole based on the partial exams you have taken, since retaking the module is only possible if you have failed the module as a whole. An exception to this is grade improvement in teacher education programs, which also allows for the retaking of a module that has already been passed.
If you fail the module as a whole, only the individual exams that were failed must be retaken. If this involves a final exam, retakes for university degree programs may take place during the second exam period; for exams held during the semester, a retake is possible no earlier than the following semester.
At the KU, there are generally two exam periods per semester during which students can take their end-of-semester exams. The Examinations Office sets binding deadlines and dates for these exams.
The two exam periods are designed to spread out the exam workload and allow for flexible, individualized study planning. The two exam periods offer the option of taking exams either immediately following the lecture period or using the lecture-free period to prepare. In addition, the second exam period serves as a prompt retake opportunity for exams that were failed or missed due to illness, which makes it easier to complete the degree within the standard length of program.
The first exam period generally takes place during the first two weeks immediately following the end of the lecture period. It is the regular date for the first attempt immediately after the course concludes.
The second exam period usually falls during the last two weeks of the lecture-free period, shortly before the start of the new semester. It can be used both for first attempts (to relieve pressure on the first exam period) and for retakes.
Important conditions for both periods:
If you take an exam during the second exam period, re-registration for the following semester is mandatory, as this exam period falls within the new semester. Otherwise, you will not be able to take the exam. However, if you have already completed all the modules required for your final degree and are only awaiting the release of your grades, you do not need to perform re-registration for the next semester. Grades are entered into KU.Campus regardless of whether you have performed re-registration.
It is not possible for an examiner from a foreign university to administer an exam for a KU module on behalf of the KU, because this cannot be justified under examination regulations for the following reasons:
Therefore, such an examination cannot be approved for individual students, especially since the student would thereby gain an advantage over other students who do not have this opportunity. This would violate the principle of equal treatment.
Please plan your examination periods so that you can complete them at the KU.
Exam results are available throughout your studies via the overview of grades in KU.Campus. The overview of grades corresponds to the preliminary transcript of records (ToR). Only modules that have been fully completed are recorded in the overview of grades, the transcript of records, and the certificate.
The type of assessment for a module (e.g., graded or ungraded) and the grading scale are specified in the examination regulations and the corresponding module description.
The specified assessment type can only be changed for future semesters by a new version of the examination regulations. Retroactive grading of a module that is to be reported as ungraded, or replacing a grade with a “passed” designation, is not permitted (not even informally).
ECTS credits are earned upon successful completion of a module. An ECTS credit is a unit of measurement for the workload according to the European Credit Transfer and Accumulation System (ECTS), which measures the average time a student spends on successfully completing coursework. One ECTS credit typically corresponds to approximately 25 to 30 hours of work. ECTS credits are listed on the certificate; ideally, 30 ECTS credits should be completed within a semester in a full-time program. Modules at the KU generally carry 5 or 10 ECTS credits.
ECTS credits are listed on the transcript of records. ECTS credits are awarded only for modules that have been fully completed; they are not awarded for individual courses or classes. It is generally not possible to list or certify ECTS credits for individual courses or classes.
At the end of each degree program, a certificate is issued that lists all modules the student must complete for the program. The certificate documents the module titles in accordance with the examination regulations, along with the ECTS credits earned and the grades—typically achieved through examinations—that were received. The certificate does not include course titles or examination designations.
In addition to the certificate, a certificate of the academic degree earned (e.g. Bachelor of Arts) and a diploma supplement are issued; the diploma supplement includes, among other things, a description of the degree program and, as an attachment, the transcript of records (ToR). The transcript of records lists the examination titles for the modules in addition to the module titles.
Exam results achieved during enrollment in the degree program that go beyond the requirements specified in the examination regulations may be certified in an appendix to the transcript of records.
There is a module description for each module in KU.Campus. These descriptions provide information, in particular, on the skills to be acquired by completing the module, as well as the courses offered for this purpose (e.g. lecture, seminar, lab, field trip, etc.), the type of assessment required (e.g. written examination, written assignment, oral examination, presentation, portfolio, etc.), the assessment of the exam performance (grade or ungraded pass/failed), and the number of ECTS credits that can be earned for the module.
Modules are legally regulated and defined in the Examination Regulations, which generally contain the following information for each module:
Unless the examination regulations for the module specify otherwise, the module concludes with a grade.
If multiple examination formats are available for the module, the instructor determines which format will be used in the current semester and generally informs students of this during the first session of the semester. In addition, the examination format is listed on the examination entry made available to students for registration/login on KU.Campus.
The modules to be completed in a degree program are generally classified as required modules, required electives, or electives. The required area consists of a list of modules that, as a rule, must all be successfully completed without exception in order to successfully complete the degree program. The required elective area consists of a list of modules from which a specific selection must be made, and the corresponding exams must be successfully passed. The elective category of a degree program generally offers a wide range of options, allowing students to pursue their own interests or establish an individual area of focus; exams in the elective category that are not passed do not necessarily count toward the degree.
The required area of a degree program is governed by the examination regulations. The required elective area of a degree program is either governed by the examination regulations or, as a separate elective catalog, forms part of the program description.
As a rule, students may complete more modules than required in the required elective and, in particular, the elective sections. In this case, students must notify the Examinations Office—no later than when applying for a certificate—which of the completed modules are to be included in the certificate and transcript of records for the required elective and elective sections. Excess modules may be additionally listed in an annex to the transcript of records.